TMA-CHECKPOINT-2.2.4
Ensure SNMP traps receivers is set
MediumLevel 1Automatedcheckpoint
Description
Enables SNMP traps receivers where traps to be sent to. PASS requires an SNMPv3 trap receiver. Audited against the Gaia clish 'show configuration' output (run 'show configuration' in clish on each gateway and management server and save the full output).
How it is checked
Audit method: Configuration pattern
- Pattern
(?m)^add snmp traps receiver \S+ version v3\b
How it is fixed
Fix method: Guidance or infrastructure patch
add snmp traps receiver 10.10.168.86 version v3 save config # CIS guidance: Run the following command to Configure the SNMP traps receivers. CLI: add snmp traps receiver 10.10.168.86 version v3 GUI: Navigate to System Management > SNMP > Trap Receivers Setting > Add > Add IP Address Version details.
Properties
- Operating systems
- Any
- Tags
- checkpointsnmp
- Reference
- CIS Check Point Firewall Benchmark v1.1.0 - 2.2.4 Ensure SNMP traps receivers is set
Check this host
Run this on a machine you are allowed to audit. The scan is read-only.
shell
tmaegis scan --target checkpoint