TMA-CHECKPOINT-2.2.4
Ensure SNMP traps receivers is set
SedangLevel 1Otomatischeckpoint
Deskripsi
Enables SNMP traps receivers where traps to be sent to. PASS requires an SNMPv3 trap receiver. Audited against the Gaia clish 'show configuration' output (run 'show configuration' in clish on each gateway and management server and save the full output).
Cara pemeriksaan
Metode audit: Pola konfigurasi
- Pola
(?m)^add snmp traps receiver \S+ version v3\b
Cara perbaikan
Metode perbaikan: Panduan atau patch infrastruktur
add snmp traps receiver 10.10.168.86 version v3 save config # CIS guidance: Run the following command to Configure the SNMP traps receivers. CLI: add snmp traps receiver 10.10.168.86 version v3 GUI: Navigate to System Management > SNMP > Trap Receivers Setting > Add > Add IP Address Version details.
Properti
- Sistem operasi
- Apa saja
- Tag
- checkpointsnmp
- Referensi
- CIS Check Point Firewall Benchmark v1.1.0 - 2.2.4 Ensure SNMP traps receivers is set
Periksa host ini
Jalankan ini pada mesin yang diizinkan untuk Anda audit. Pemindaian bersifat hanya baca.
shell
tmaegis scan --target checkpoint