Ensure SNMP traps receivers is set

中级别 1自动化checkpoint

说明

Enables SNMP traps receivers where traps to be sent to. PASS requires an SNMPv3 trap receiver. Audited against the Gaia clish 'show configuration' output (run 'show configuration' in clish on each gateway and management server and save the full output).

检查方式

审计方法: 配置正则匹配

匹配模式: (?m)^add snmp traps receiver \S+ version v3\b

修复方式

修复方法: 操作指南或基础设施补丁

add snmp traps receiver 10.10.168.86 version v3 save config # CIS guidance: Run the following command to Configure the SNMP traps receivers. CLI: add snmp traps receiver 10.10.168.86 version v3 GUI: Navigate to System Management > SNMP > Trap Receivers Setting > Add > Add IP Address Version details.

属性

操作系统: 任意
标签: checkpointsnmp
参考: CIS Check Point Firewall Benchmark v1.1.0 - 2.2.4 Ensure SNMP traps receivers is set

检查本机

请在您有权审计的机器上运行此命令。扫描为只读操作。

shell

tmaegis scan --target checkpoint