TMA-CHECKPOINT-2.2.4
Ensure SNMP traps receivers is set
Opis
Enables SNMP traps receivers where traps to be sent to. PASS requires an SNMPv3 trap receiver. Audited against the Gaia clish 'show configuration' output (run 'show configuration' in clish on each gateway and management server and save the full output).
Kako se proverava
Metod provere: Obrazac konfiguracije
- Obrazac
(?m)^add snmp traps receiver \S+ version v3\b
Kako se ispravlja
Metod ispravke: Smernica ili zakrpa infrastrukture
add snmp traps receiver 10.10.168.86 version v3 save config # CIS guidance: Run the following command to Configure the SNMP traps receivers. CLI: add snmp traps receiver 10.10.168.86 version v3 GUI: Navigate to System Management > SNMP > Trap Receivers Setting > Add > Add IP Address Version details.
Svojstva
- Operativni sistemi
- Bilo koji
- Oznake
- checkpointsnmp
- Referenca
- CIS Check Point Firewall Benchmark v1.1.0 - 2.2.4 Ensure SNMP traps receivers is set
Proverite ovaj računar
Pokrenite ovo na računaru za koji imate dozvolu za proveru. Skeniranje radi u režimu samo za čitanje.
tmaegis scan --target checkpoint