Ensure SNMP traps receivers is set

中等級 1自動化checkpoint

說明

Enables SNMP traps receivers where traps to be sent to. PASS requires an SNMPv3 trap receiver. Audited against the Gaia clish 'show configuration' output (run 'show configuration' in clish on each gateway and management server and save the full output).

檢查方式

稽核方法: 設定正規表示式

比對模式: (?m)^add snmp traps receiver \S+ version v3\b

修補方式

修補方法: 操作指南或基礎設施修補檔

add snmp traps receiver 10.10.168.86 version v3 save config # CIS guidance: Run the following command to Configure the SNMP traps receivers. CLI: add snmp traps receiver 10.10.168.86 version v3 GUI: Navigate to System Management > SNMP > Trap Receivers Setting > Add > Add IP Address Version details.

屬性

作業系統: 不限
標籤: checkpointsnmp
參考資料: CIS Check Point Firewall Benchmark v1.1.0 - 2.2.4 Ensure SNMP traps receivers is set

檢查此主機

請在您有權稽核的機器上執行此指令。掃描為唯讀操作。

shell

tmaegis scan --target checkpoint