Ensure allowed-client is set to those necessary for device management

中级别 2自动化checkpoint

说明

Permit only the necessary IP addresses to be used to manage the device. FAILs if allowed-client still permits any host. Audited against the Gaia clish 'show configuration' output (run 'show configuration' in clish on each gateway and management server and save the full output).

检查方式

审计方法: 配置正则匹配

匹配模式: (?m)^add allowed-client host any-host\b

修复方式

修复方法: 操作指南或基础设施补丁

add allowed-client network ipv4-address <mgmt-net> mask-length 24 delete allowed-client host any-host save config # CIS guidance: Run the following command to remove the IP Address or Network from allowed-client list. CLI: delete allowed-client host (ipv4-address | ipv6-address) <IP delete allowed-client network (ipv4-address | ipv6-address) <Network> GUI: Navigate to System Management > Host Access > Allowed Hosts > Select and Delete the not required IP address or Network

属性

操作系统: 任意
标签: checkpointmanagement
参考: CIS Check Point Firewall Benchmark v1.1.0 - 2.5.5 Ensure allowed-client is set to those necessary for device management

检查本机

请在您有权审计的机器上运行此命令。扫描为只读操作。

shell

tmaegis scan --target checkpoint --level 2