TMA-CHECKPOINT-2.5.5
Ensure allowed-client is set to those necessary for device management
Описание
Permit only the necessary IP addresses to be used to manage the device. FAILs if allowed-client still permits any host. Audited against the Gaia clish 'show configuration' output (run 'show configuration' in clish on each gateway and management server and save the full output).
Как проверяется
Метод проверки: Шаблон конфигурации
- Шаблон
(?m)^add allowed-client host any-host\b
Как исправляется
Метод исправления: Рекомендация или патч инфраструктуры
add allowed-client network ipv4-address <mgmt-net> mask-length 24 delete allowed-client host any-host save config # CIS guidance: Run the following command to remove the IP Address or Network from allowed-client list. CLI: delete allowed-client host (ipv4-address | ipv6-address) <IP delete allowed-client network (ipv4-address | ipv6-address) <Network> GUI: Navigate to System Management > Host Access > Allowed Hosts > Select and Delete the not required IP address or Network
Свойства
- Операционные системы
- Любая
- Теги
- checkpointmanagement
- Источник
- CIS Check Point Firewall Benchmark v1.1.0 - 2.5.5 Ensure allowed-client is set to those necessary for device management
Проверить этот хост
Выполните команду на компьютере, аудит которого вам разрешён. Сканирование работает только на чтение.
tmaegis scan --target checkpoint --level 2