TMA-CHECKPOINT-2.5.5
Ensure allowed-client is set to those necessary for device management
Opis
Permit only the necessary IP addresses to be used to manage the device. FAILs if allowed-client still permits any host. Audited against the Gaia clish 'show configuration' output (run 'show configuration' in clish on each gateway and management server and save the full output).
Kako se proverava
Metod provere: Obrazac konfiguracije
- Obrazac
(?m)^add allowed-client host any-host\b
Kako se ispravlja
Metod ispravke: Smernica ili zakrpa infrastrukture
add allowed-client network ipv4-address <mgmt-net> mask-length 24 delete allowed-client host any-host save config # CIS guidance: Run the following command to remove the IP Address or Network from allowed-client list. CLI: delete allowed-client host (ipv4-address | ipv6-address) <IP delete allowed-client network (ipv4-address | ipv6-address) <Network> GUI: Navigate to System Management > Host Access > Allowed Hosts > Select and Delete the not required IP address or Network
Svojstva
- Operativni sistemi
- Bilo koji
- Oznake
- checkpointmanagement
- Referenca
- CIS Check Point Firewall Benchmark v1.1.0 - 2.5.5 Ensure allowed-client is set to those necessary for device management
Proverite ovaj računar
Pokrenite ovo na računaru za koji imate dozvolu za proveru. Skeniranje radi u režimu samo za čitanje.
tmaegis scan --target checkpoint --level 2