TMA-CHECKPOINT-2.5.5
Ensure allowed-client is set to those necessary for device management
Beschreibung
Permit only the necessary IP addresses to be used to manage the device. FAILs if allowed-client still permits any host. Audited against the Gaia clish 'show configuration' output (run 'show configuration' in clish on each gateway and management server and save the full output).
So wird geprüft
Prüfmethode: Konfigurationsmuster
- Muster
(?m)^add allowed-client host any-host\b
So wird behoben
Behebungsmethode: Anleitung oder Infrastruktur-Patch
add allowed-client network ipv4-address <mgmt-net> mask-length 24 delete allowed-client host any-host save config # CIS guidance: Run the following command to remove the IP Address or Network from allowed-client list. CLI: delete allowed-client host (ipv4-address | ipv6-address) <IP delete allowed-client network (ipv4-address | ipv6-address) <Network> GUI: Navigate to System Management > Host Access > Allowed Hosts > Select and Delete the not required IP address or Network
Eigenschaften
- Betriebssysteme
- Beliebig
- Tags
- checkpointmanagement
- Referenz
- CIS Check Point Firewall Benchmark v1.1.0 - 2.5.5 Ensure allowed-client is set to those necessary for device management
Diesen Host prüfen
Führen Sie dies auf einem Rechner aus, den Sie prüfen dürfen. Der Scan ist schreibgeschützt.
tmaegis scan --target checkpoint --level 2