TMA-CHECKPOINT-2.5.5

Ensure allowed-client is set to those necessary for device management

中レベル 2自動checkpoint

説明

Permit only the necessary IP addresses to be used to manage the device. FAILs if allowed-client still permits any host. Audited against the Gaia clish 'show configuration' output (run 'show configuration' in clish on each gateway and management server and save the full output).

チェック方法

監査方法: 設定パターン

パターン: (?m)^add allowed-client host any-host\b

修正方法

修正方法: ガイダンスまたは IaC パッチ

add allowed-client network ipv4-address <mgmt-net> mask-length 24 delete allowed-client host any-host save config # CIS guidance: Run the following command to remove the IP Address or Network from allowed-client list. CLI: delete allowed-client host (ipv4-address | ipv6-address) <IP delete allowed-client network (ipv4-address | ipv6-address) <Network> GUI: Navigate to System Management > Host Access > Allowed Hosts > Select and Delete the not required IP address or Network

プロパティ

オペレーティングシステム: すべて
タグ: checkpointmanagement
参照: CIS Check Point Firewall Benchmark v1.1.0 - 2.5.5 Ensure allowed-client is set to those necessary for device management

このホストをチェック

監査が許可されているマシンで実行してください。スキャンは読み取り専用です。

shell

tmaegis scan --target checkpoint --level 2