Check Point
TMA-CHECKPOINT-2.5.5
Ensure allowed-client is set to those necessary for device management
Description
Permit only the necessary IP addresses to be used to manage the device. FAILs if allowed-client still permits any host. Audited against the Gaia clish 'show configuration' output (run 'show configuration' in clish on each gateway and management server and save the full output).
Méthode de vérification
Méthode d'audit: Motif de configuration
- Motif
(?m)^add allowed-client host any-host\b
Méthode de correction
Méthode de correction: Recommandation ou correctif d'infrastructure
add allowed-client network ipv4-address <mgmt-net> mask-length 24 delete allowed-client host any-host save config # CIS guidance: Run the following command to remove the IP Address or Network from allowed-client list. CLI: delete allowed-client host (ipv4-address | ipv6-address) <IP delete allowed-client network (ipv4-address | ipv6-address) <Network> GUI: Navigate to System Management > Host Access > Allowed Hosts > Select and Delete the not required IP address or Network
Propriétés
- Systèmes d'exploitation
- Tous
- Étiquettes
- checkpointmanagement
- Référence
- CIS Check Point Firewall Benchmark v1.1.0 - 2.5.5 Ensure allowed-client is set to those necessary for device management
Vérifier cet hôte
Exécutez cette commande sur une machine que vous êtes autorisé à auditer. L'analyse est en lecture seule.
tmaegis scan --target checkpoint --level 2