TMA-ALINUX2-3.2.1

Ensure source routed packets are not accepted

보통레벨 1자동linux

설명

In networking, source routing allows a sender to partially or fully specify the route packets take through a network. In contrast, non-source routed packets travel a path determined by routers in the network. In some cases, systems may not be routable or reachable from some locations (e.g. private addresses vs. Internet routable), and so source routed packets would need to be used.

점검 방법

감사 방식: 셸 명령

shell

chk() { p=$1; allowed=" $2 "; case $p in net.ipv6.*) [ -d /proc/sys/net/ipv6 ] || return 0;; esac; v=$(sysctl -n "$p" 2>/dev/null) || { echo "$p: not available"; return 1; }; case "$allowed" in *" $v "*) ;; *) echo "$p is $v (running)"; return 1;; esac; sd=$(readlink -e /lib/systemd/systemd-sysctl || readlink -e /usr/lib/systemd/systemd-sysctl); f=$("$sd" --cat-config 2>/dev/null | grep -Po "^\h*${p//./\.}\h*=\h*\K\H+" | tail -n1); [ -n "$f" ] || { echo "$p is not set in any sysctl configuration file"; return 1; }; case "$allowed" in *" $f "*) ;; *) echo "$p is $f in configuration"; return 1;; esac; }; if chk net.ipv4.conf.all.accept_source_route 0 && chk net.ipv4.conf.default.accept_source_route 0 && chk net.ipv6.conf.all.accept_source_route 0 && chk net.ipv6.conf.default.accept_source_route 0; then echo compliant; fi

예상 출력: compliant

조치 방법

조치 방식: 가이드 또는 인프라 패치

Set the following parameters in /etc/sysctl.conf or a /etc/sysctl.d/* file: net.ipv4.conf.all.accept_source_route = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv6.conf.all.accept_source_route = 0 net.ipv6.conf.default.accept_source_route = 0 Run the following commands to set the active kernel parameters: # sysctl -w net.ipv4.conf.all.accept_source_route=0 # sysctl -w net.ipv4.conf.default.accept_source_route=0 # sysctl -w net.ipv6.conf.all.accept_source_route=0 # sysctl -w net.ipv6.conf.default.accept_source_route=0 # sysctl -w net.ipv4.route.flush=1 # sysctl -w net.ipv6.route.flush=1

속성

운영 체제: alinux-2
태그: cis-convertedkernellinuxsysctl
참고 자료: CIS Aliyun Linux 2 Benchmark v1.0.0 ARCHIVE - 3.2.1

이 호스트 점검하기

감사 권한이 있는 시스템에서 실행하세요. 스캔은 읽기 전용입니다.

shell

tmaegis scan --target linux