TMAegisBêta
Plus de règles pour linux

Linux distributions

TMA-ALINUX2-3.2.8

Ensure TCP SYN Cookies is enabled

MoyenneNiveau 1Automatiséelinux

Description

When tcp_syncookies is set, the kernel will handle TCP SYN packets normally until the half-open connection queue is full, at which time, the SYN cookie functionality kicks in. SYN cookies work by not using the SYN queue at all. Instead, the kernel simply replies to the SYN with a SYN|ACK, but will include a specially crafted TCP sequence number that encodes the source and destination IP address and port number and the time the packet was sent. A legitimate connection would send the ACK packet of the three way handshake with the specially crafted sequence number. This allows the system to verif

Méthode de vérification

Méthode d'audit: Commande shell

shell
chk() { p=$1; allowed=" $2 "; case $p in net.ipv6.*) [ -d /proc/sys/net/ipv6 ] || return 0;; esac; v=$(sysctl -n "$p" 2>/dev/null) || { echo "$p: not available"; return 1; }; case "$allowed" in *" $v "*) ;; *) echo "$p is $v (running)"; return 1;; esac; sd=$(readlink -e /lib/systemd/systemd-sysctl || readlink -e /usr/lib/systemd/systemd-sysctl); f=$("$sd" --cat-config 2>/dev/null | grep -Po "^\h*${p//./\.}\h*=\h*\K\H+" | tail -n1); [ -n "$f" ] || { echo "$p is not set in any sysctl configuration file"; return 1; }; case "$allowed" in *" $f "*) ;; *) echo "$p is $f in configuration"; return 1;; esac; }; if chk net.ipv4.tcp_syncookies 1; then echo compliant; fi
Sortie attendue
compliant

Méthode de correction

Méthode de correction: Recommandation ou correctif d'infrastructure

Set the following parameters in /etc/sysctl.conf or a /etc/sysctl.d/* file: net.ipv4.tcp_syncookies = 1 Run the following commands to set the active kernel parameters: # sysctl -w net.ipv4.tcp_syncookies=1 # sysctl -w net.ipv4.route.flush=1

Propriétés

Systèmes d'exploitation
alinux-2
Étiquettes
cis-convertedkernellinuxsysctl
Référence
CIS Aliyun Linux 2 Benchmark v1.0.0 ARCHIVE - 3.2.8

Vérifier cet hôte

Exécutez cette commande sur une machine que vous êtes autorisé à auditer. L'analyse est en lecture seule.

shell
tmaegis scan --target linux