Ensure virtual network flow log service is enabled

中等級 1人工審核alibaba

說明

The flow log can be used to capture the traffic of an Elastic Network Interface (ENI), Virtual Private Cloud (VPC) or Virtual Switch (VSwitch). The flow log of a VPC or VSwitch shall be integrated with Log Service to capture the traffic of all ENIs in the VPC or VSwtich including the ENIs created after the flow log ... By integrating virtual network flow log to Log Service, the inbound and outbound traffic over the ENI in your VPC is captured for monitoring and analysis which can be useful in monitoring network traffic and access ... Reported as a manual review item: the benchmark audit needs console review or organisational judgement.

檢查方式

稽核方法: 人工審核

此項建議無法自動檢查。當您傳入 --include-manual 時，掃描結果會列出此項目並附帶這些說明。

Perform the following ensure the virtual network flow log is enabled: 1. Logon to VPC console. 2. In the left-side navigation pane, click FlowLog. 3. Select the region to which the target flow log belongs. 4. On the FlowLog page, ensure the target flow log and logstore is configured.

修補方式

修補方法: 操作指南或基礎設施修補檔

Perform the following ensure the virtual network flow log is enabled: 1. Logon to VPC console. 2. In the left-side navigation pane, click FlowLog. 3. Select the region to which the flow log is to be created. 4. On the FlowLog page, click Create FlowLog. 5. On the Create FlowLog page, set the required parameters by following the instruction, and then click OK.

屬性

作業系統: 不限
標籤: alibabalogging
參考資料: CIS Alibaba Cloud Foundation Benchmark v2.0.1 - 2.5 Ensure virtual network flow log service is enabled