Ensure virtual network flow log service is enabled

中レベル 1手動レビューalibaba

説明

The flow log can be used to capture the traffic of an Elastic Network Interface (ENI), Virtual Private Cloud (VPC) or Virtual Switch (VSwitch). The flow log of a VPC or VSwitch shall be integrated with Log Service to capture the traffic of all ENIs in the VPC or VSwtich including the ENIs created after the flow log ... By integrating virtual network flow log to Log Service, the inbound and outbound traffic over the ENI in your VPC is captured for monitoring and analysis which can be useful in monitoring network traffic and access ... Reported as a manual review item: the benchmark audit needs console review or organisational judgement.

チェック方法

監査方法: 手動レビュー

この推奨事項は自動ではチェックできません。--include-manual を指定すると、スキャン結果にこの手順付きで一覧表示されます。

Perform the following ensure the virtual network flow log is enabled: 1. Logon to VPC console. 2. In the left-side navigation pane, click FlowLog. 3. Select the region to which the target flow log belongs. 4. On the FlowLog page, ensure the target flow log and logstore is configured.

修正方法

修正方法: ガイダンスまたは IaC パッチ

Perform the following ensure the virtual network flow log is enabled: 1. Logon to VPC console. 2. In the left-side navigation pane, click FlowLog. 3. Select the region to which the flow log is to be created. 4. On the FlowLog page, click Create FlowLog. 5. On the Create FlowLog page, set the required parameters by following the instruction, and then click OK.

プロパティ

オペレーティングシステム: すべて
タグ: alibabalogging
参照: CIS Alibaba Cloud Foundation Benchmark v2.0.1 - 2.5 Ensure virtual network flow log service is enabled