TMAegisBeta
Thêm quy tắc cho cisco-asa

Cisco ASA

TMA-CISCO-ASA-1.2.4

Ensure 'Unused Interfaces' is disable

Trung bìnhCấp 1Xem xét thủ côngcisco-asa

Mô tả

Disables the unused interfaces. Shutting down the unused interfaces is a complement to physical security. In fact, an attacker connecting physically to an unused port of the security appliance can use the interface to gain access to the device if the relevant interface has not been disabled ... Not reliably checkable from an exported configuration. Reported as SKIP with review instructions.

Cách kiểm tra

Phương pháp kiểm tra: Xem xét thủ công

Khuyến nghị này không thể kiểm tra tự động. Lần quét sẽ liệt kê mục này kèm hướng dẫn khi bạn truyền cờ --include-manual.

Not reliably checkable from an exported configuration. - Step 1: Run the following command to check if there are unsused ports that have not been disabled. hostname#sh int ip brief | in __down Example: This first command lists all the interfaces Corp-FW# show int ip brief Interface IP-Address OK? Method Status Protocol GigabitEthernet0/1 unassigned YES unset up up GigabitEthernet0/1.201 172.16.61.1 YES CONFIG up up GigabitEthernet0/1.202 172.16.62.171 YES CONFIG up up GigabitEthernet1/0 unassigned YES unset administratively down down GigabitEthernet1/1 unassigned YES unset ...

Cách khắc phục

Phương pháp khắc phục: Hướng dẫn hoặc bản vá hạ tầng

! - Step 1: Identify the physical name <interface_physical_name> of the unused interfaces that are not disabled - Step 2: For each of the identified interfaces, run the following command interface <interface_physical_name> shutdown

Thuộc tính

Hệ điều hành
Bất kỳ
Thẻ
cisco-asanetworkhardening
Tham chiếu
CIS Cisco ASA 9.x Firewall Benchmark v1.1.0 - 1.2.4 Ensure 'Unused Interfaces' is disable