Ensure System Integrity Protection Status (SIP) Is Enabled

ВисокаНиво 1Аутоматскаmacos

Опис

System Integrity Protection is a security feature introduced in OS X 10.11 El Capitan. System Integrity Protection restricts access to System domain locations and restricts runtime attachment to system processes. Any attempt to inspect or attach to a system process will fail. Kernel Extensions are now restricted to /Library/Extensions and are required to be signed with a Developer ID. Running without System Integrity Protection on a production system runs the risk of the modification of system binaries or code injection of system processes that would otherwise be protected by SIP.

Како се проверава

Метод провере: Команда љуске

shell

out=$(/usr/bin/csrutil status 2>/dev/null) || exit 1
printf '%s\n' "$out" | /usr/bin/grep -q "System Integrity Protection status: enabled" && echo compliant

Очекивани излаз: compliant

Како се исправља

Метод исправке: Смерница или закрпа инфраструктуре

Terminal Method: Perform the following steps to enable System Integrity Protection: 1. Reboot into the Recovery Partition (system-reboot and hold down Command (⌘) + R) 2. Select Utilities 3. Select Terminal 4. Run the following command: # /usr/bin/sudo /usr/bin/csrutil enable Successfully enabled System Integrity Protection. Please restart the machine for the changes to take effect. 5. Reboot the computer Note: You should research why the system had SIP disabled. It might be a better option to erase the Mac and reinstall the operating system. That is at your discretion. Note: You cannot enable System Integrity Protection from the booted operating system. If the remediation is attempted in the booted OS and not the Recovery Partition the output will give the error csrutil: failed to modify system integrity configuration. This tool needs to be executed from the Recovery OS.

Својства

Оперативни системи: macos-14
Ознаке: macossonoma
Референца: CIS Apple macOS 14.0 Sonoma Benchmark v3.1.0 - 5.1.2 Ensure System Integrity Protection Status (SIP) Is Enabled

Проверите овај рачунар

Покрените ово на рачунару за који имате дозволу за проверу. Скенирање ради у режиму само за читање.

shell

tmaegis scan --target macos