TMA-CHECKPOINT-2.5.4

Ensure Radius or TACACS+ server is configured

높음레벨 1자동checkpoint

설명

Configured the TACACS-Servers or Radius server for central authentication. PASS requires a RADIUS or TACACS+ server to be defined. Audited against the Gaia clish 'show configuration' output (run 'show configuration' in clish on each gateway and management server and save the full output).

점검 방법

감사 방식: 구성 패턴

패턴: (?m)^(?:add aaa radius-servers priority \d+ host \S+|add aaa tacacs-servers priority \d+ server \S+)

조치 방법

조치 방식: 가이드 또는 인프라 패치

set aaa tacacs-servers state on add aaa tacacs-servers priority 1 server <IP> key <key> timeout 5 (or) add aaa radius-servers priority 1 host <IP> secret <key> port 1812 timeout 3 save config # CIS guidance: run the following command to enable and add TACACS+ servers. CLI: set aaa tacacs-servers state on add aaa tacacs-servers priority <priority_value> server <IP_Address> key <Key> timeout <timeout_value> GUI: Navigate to User Management > Authentication Servers > TACACS+ configuration > Ensuere Enable TACACS+ authentication is checked Navigate to User Management > Authentication Servers > TACACS+ configuration > Enable TACACS+ Servers > Add Provide <Server_IP_Address>, <Priority> and <Timeout>. Run the following command to enable and add Radius servers. CLI: add aaa radius-servers priority <priority_value> host <IP_Address> secret <Key> port <Port_number> timeout <timeout_value> GUI: Navigate to User Management > Authentication Servers > Radius Servers > Add Provide <Server_IP_Address>, <Priority>, <UDP_Port> and <Timeout>.

속성

운영 체제: 모두
태그: checkpointauthentication
참고 자료: CIS Check Point Firewall Benchmark v1.1.0 - 2.5.4 Ensure Radius or TACACS+ server is configured

이 호스트 점검하기

감사 권한이 있는 시스템에서 실행하세요. 스캔은 읽기 전용입니다.

shell

tmaegis scan --target checkpoint