TMA-CHECKPOINT-2.5.4

Ensure Radius or TACACS+ server is configured

高レベル 1自動checkpoint

説明

Configured the TACACS-Servers or Radius server for central authentication. PASS requires a RADIUS or TACACS+ server to be defined. Audited against the Gaia clish 'show configuration' output (run 'show configuration' in clish on each gateway and management server and save the full output).

チェック方法

監査方法: 設定パターン

パターン: (?m)^(?:add aaa radius-servers priority \d+ host \S+|add aaa tacacs-servers priority \d+ server \S+)

修正方法

修正方法: ガイダンスまたは IaC パッチ

set aaa tacacs-servers state on add aaa tacacs-servers priority 1 server <IP> key <key> timeout 5 (or) add aaa radius-servers priority 1 host <IP> secret <key> port 1812 timeout 3 save config # CIS guidance: run the following command to enable and add TACACS+ servers. CLI: set aaa tacacs-servers state on add aaa tacacs-servers priority <priority_value> server <IP_Address> key <Key> timeout <timeout_value> GUI: Navigate to User Management > Authentication Servers > TACACS+ configuration > Ensuere Enable TACACS+ authentication is checked Navigate to User Management > Authentication Servers > TACACS+ configuration > Enable TACACS+ Servers > Add Provide <Server_IP_Address>, <Priority> and <Timeout>. Run the following command to enable and add Radius servers. CLI: add aaa radius-servers priority <priority_value> host <IP_Address> secret <Key> port <Port_number> timeout <timeout_value> GUI: Navigate to User Management > Authentication Servers > Radius Servers > Add Provide <Server_IP_Address>, <Priority>, <UDP_Port> and <Timeout>.

プロパティ

オペレーティングシステム: すべて
タグ: checkpointauthentication
参照: CIS Check Point Firewall Benchmark v1.1.0 - 2.5.4 Ensure Radius or TACACS+ server is configured

このホストをチェック

監査が許可されているマシンで実行してください。スキャンは読み取り専用です。

shell

tmaegis scan --target checkpoint