VMware ESXi
TMA-ESXI9-3.9
Host must automatically deactivate shell services
Mô tả
Enabling the automatic deactivation of shell services minimizes the attack surface on the host. The time window for the ESXi Shell and SSH services' availability is defined by UserVars.ESXiShellTimeOut, after which these services are terminated. The recommended setting for this parameter is 3600. The audit reads UserVars.ESXiShellTimeOut with esxcli and requires 3600 seconds or less (0 disables it and fails). Runs in the ESXi Shell (busybox sh) as root.
Cách kiểm tra
Phương pháp kiểm tra: Lệnh shell
out=$(esxcli system settings advanced list -o /UserVars/ESXiShellTimeOut 2>/dev/null) || exit 1
v=$(printf '%s\n' "$out" | awk '$1=="Int" && $2=="Value:" {print $3; exit}')
case "$v" in ''|*[!0-9-]*) echo '/UserVars/ESXiShellTimeOut: no integer value'; exit 1 ;; esac
if [ "$v" -gt 0 ] && [ "$v" -le 3600 ]; then echo compliant; else echo "/UserVars/ESXiShellTimeOut = $v (expected 1-3600)"; fi- Đầu ra mong đợi
compliant
Cách khắc phục
Phương pháp khắc phục: Hướng dẫn hoặc bản vá hạ tầng
To set the timeout to the desired value, perform the following from the vSphere web client: 1. From the vSphere Web Client, select the host. 2. Click Configure then expand System. 3. Select Advanced System Settings then click Edit. 4. Enter ESXiShellTimeOut in the filter. 5. Set the value for this parameter is set to 3600 (1 hour) or less 6. Click OK. Note: A value of 0 disables the ESXiShellTimeOut. Alternately, run the following PowerCLI command: # Set UserVars.ESXiShellTimeOut to 3600 on all hosts Get-VMHost | Get-AdvancedSetting -Name 'UserVars.ESXiShellTimeOut' | Set- AdvancedSetting -Value "3600"
Thuộc tính
- Hệ điều hành
- Bất kỳ
- Thẻ
- vmwareesximanagement
- Tham chiếu
- CIS VMware ESXi 9.0 Benchmark v1.0.0 - 3.9 Host must automatically deactivate shell services
Kiểm tra máy này
Chạy lệnh này trên máy bạn được phép kiểm tra. Lần quét chỉ ở chế độ đọc.
tmaegis scan --target vmware