Dynamic ARP Inspection

CaoCấp 1Xem xét thủ côngaruba-cx

Mô tả

Dynamic ARP Inspection (DAI) is a security feature available in AOS-CX switches that validates ARP packets on the network to prevent ARP spoofing and ARP-based man-in- the-middle attacks. It verifies ARP requests and responses against trusted sources, such as DHCP snooping and static ARP entries.

Cách kiểm tra

Phương pháp kiểm tra: Xem xét thủ công

Khuyến nghị này không thể kiểm tra tự động. Lần quét sẽ liệt kê mục này kèm hướng dẫn khi bạn truyền cờ --include-manual.

Run 'show arp inspection vlan' and 'show arp inspection statistics'. Dynamic ARP inspection must be enabled on user VLANs, with only uplinks/infrastructure ports trusted ('arp inspection trust').

Cách khắc phục

Phương pháp khắc phục: Hướng dẫn hoặc bản vá hạ tầng

Following command enables Dynamic ARP inspection on the current VLAN, which means that ARP packets received from untrusted interfaces are discarded if they have an Invalid IP-to-MAC address binding - vlan <vlan-id> arp inspection Configures the interface as a trusted. All interfaces are untrusted by default - interface <interface-id> arp inspection trust Dynamic ARP Inspection is enforced using DHCP Snooping binding and Static IP Binding. Refer to the DHCP Snooping section for the DHCP snooping configuration. To enable the Static IP Binding use the below configuration - vlan <vlan-id> arp ipv4 <IPV4_ADDR> mac <MAC_ADDR>

Thuộc tính

Hệ điều hành: Bất kỳ
Thẻ: aruba-cxthreat-prevention
Tham chiếu: CIS HPE Aruba Networking CX Switch Benchmark v1.0.1 - 3.5 Dynamic ARP Inspection