Host must automatically terminate idle shells

Nasıl denetlenir

Denetim yöntemi: Kabuk komutu

out=$(esxcli system settings advanced list -o /UserVars/ESXiShellInteractiveTimeOut 2>/dev/null) || exit 1
v=$(printf '%s\n' "$out" | awk '$1=="Int" && $2=="Value:" {print $3; exit}')
case "$v" in ''|*[!0-9-]*) echo '/UserVars/ESXiShellInteractiveTimeOut: no integer value'; exit 1 ;; esac
if [ "$v" -gt 0 ] && [ "$v" -le 300 ]; then echo compliant; else echo "/UserVars/ESXiShellInteractiveTimeOut = $v (expected 1-300)"; fi

Beklenen çıktı

compliant

Nasıl düzeltilir

Düzeltme yöntemi: Kılavuz veya altyapı yaması

To set the timeout to the desired value, perform the following from the vSphere web client: 1. From the vSphere Web Client, select the host. 2. Click Configure then expand System. 3. Select Advanced System Settings then click Edit. 4. Enter ESXiShellInteractiveTimeOut in the filter. 5. Set the value for this parameter is set to the appropriate value (300 seconds or less). 6. Click OK. Note: A value of 0 disables the ESXi ShellInteractiveTimeOut. Alternately, use the following PowerCLI command: # Set Remove UserVars.ESXiShellInteractiveTimeOut to 300 on all hosts Get-VMHost | Get-AdvancedSetting -Name 'UserVars.ESXiShellInteractiveTimeOut' | Set-AdvancedSetting -Value "300"

Bu ana makineyi denetle

Bunu denetleme izniniz olan bir makinede çalıştırın. Tarama salt okunurdur.

tmaegis scan --target vmware