Configure FCoE Zoning

SrednjaNivo 2Ručni pregledcisco-nxos

Opis

Cisco uses a construction called a "VSAN" (analagous to a VLAN) which is used to restrict access between hosts and SAN resources. In restrictive cases, a typical VSAN will include two entries for the two host FCoE interfaces, and two entries for the SAN Controller interfaces (usually an FCoE SAN will have at least two). CIS assessment: Manual. Reported as SKIP with review instructions.

Kako se proverava

Metod provere: Ručni pregled

Ova preporuka se ne može proveriti automatski. Skeniranje je navodi sa ovim uputstvima kada prosledite --include-manual.

CIS assessment: Manual. switch# sho vsan 101 vsan 101 information name:HOST_X_SAN_Y state:active interoperability mode:default loadbalancing:src-id/dst-id/oxid operational state:down switch# sho vsan membership vsan 1 interfaces: vsan 100 interfaces: vsan 101 interfaces: vfc1001 vfc1002 vsan 4079(evfp_isolated_vsan) interfaces: vsan 4094(isolated_vsan) interfaces: switch# sho int vfc 1001 vfc1001 is down (Administratively down) Bound MAC is 00:01:0b:00:00:02 Hardware is Ethernet Port WWN is 23:e8:8c:60:4f:a6:29:bf Admin port mode is F, trunk mode is on snmp ...

Kako se ispravlja

Metod ispravke: Smernica ili zakrpa infrastrukture

! Create a VSAN. Give it a meaningful name vsan database vsan 101 vsan 101 name HOST_X_SAN_Y Create Virtual Fiber Channel Interfaces. interface vfc 1001 bind mac-address 00:01:0b:00:00:02 int vfc 1002 bind mac-address 00:01:0b:00:00:08 int vfc 1003 bind interface e 1/4 Add VFC interfaces to the VSAN vsan database vsan 101 interface vfc 1001 vsan 101 interface vfc 1002 vsan 101 interface vfc 1003

Svojstva

Operativni sistemi: Bilo koji
Oznake: cisco-nxosnetworkhardening
Referenca: CIS Cisco NX-OS Benchmark v1.2.0 - 3.5.2 Configure FCoE Zoning