Disable iPXE (Pre-boot eXecution Environment)

SrednjaNivo 2Automatskacisco-nxos

Opis

iPXE allows a NX-OS device to boot from the network, usually using HTTP. This method allows the switch bootup image to be controlled centrally, often using DHCP services. Audited against the output of 'show running-config' (run 'terminal length 0' first; do not use 'show running-config all', which adds default values).

Kako se proverava

Metod provere: Obrazac konfiguracije

Obrazac: (?m)^boot order [^\n]*\bpxe\b

Kako se ispravlja

Metod ispravke: Smernica ili zakrpa infrastrukture

! Setting the boot order explicity to "bootflash" will remediate a PXE configured device. boot order bootflash You can also "no" the current boot order line to revert to the default setting. For instance, to remove the configuration line "boot order pxe bootflash" command, use no boot order pxe bootflash

Svojstva

Operativni sistemi: Bilo koji
Oznake: cisco-nxosnetworkmanagement-plane
Referenca: CIS Cisco NX-OS Benchmark v1.2.0 - 1.7.2 Disable iPXE (Pre-boot eXecution Environment)

Proverite ovaj računar

Pokrenite ovo na računaru za koji imate dozvolu za proveru. Skeniranje radi u režimu samo za čitanje.

shell

tmaegis scan --target cisco-nxos --level 2