TMA-ALINUX2-3.2.2

Ensure ICMP redirects are not accepted

СреднийУровень 1Автоматическаяlinux

Описание

ICMP redirect messages are packets that convey routing information and tell your host (acting as a router) to send packets via an alternate path. It is a way of allowing an outside routing device to update your system routing tables. By setting net.ipv4.conf.all.accept_redirects and net.ipv6.conf.all.accept_redirects to 0, the system will not accept any ICMP redirect messages, and therefore, won't allow outsiders to update the system's routing tables.

Как проверяется

Метод проверки: Команда оболочки

shell

chk() { p=$1; allowed=" $2 "; case $p in net.ipv6.*) [ -d /proc/sys/net/ipv6 ] || return 0;; esac; v=$(sysctl -n "$p" 2>/dev/null) || { echo "$p: not available"; return 1; }; case "$allowed" in *" $v "*) ;; *) echo "$p is $v (running)"; return 1;; esac; sd=$(readlink -e /lib/systemd/systemd-sysctl || readlink -e /usr/lib/systemd/systemd-sysctl); f=$("$sd" --cat-config 2>/dev/null | grep -Po "^\h*${p//./\.}\h*=\h*\K\H+" | tail -n1); [ -n "$f" ] || { echo "$p is not set in any sysctl configuration file"; return 1; }; case "$allowed" in *" $f "*) ;; *) echo "$p is $f in configuration"; return 1;; esac; }; if chk net.ipv4.conf.all.accept_redirects 0 && chk net.ipv4.conf.default.accept_redirects 0 && chk net.ipv6.conf.all.accept_redirects 0 && chk net.ipv6.conf.default.accept_redirects 0; then echo compliant; fi

Ожидаемый вывод: compliant

Как исправляется

Метод исправления: Рекомендация или патч инфраструктуры

Set the following parameters in /etc/sysctl.conf or a /etc/sysctl.d/* file: net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv6.conf.all.accept_redirects = 0 net.ipv6.conf.default.accept_redirects = 0 Run the following commands to set the active kernel parameters: # sysctl -w net.ipv4.conf.all.accept_redirects=0 # sysctl -w net.ipv4.conf.default.accept_redirects=0 # sysctl -w net.ipv6.conf.all.accept_redirects=0 # sysctl -w net.ipv6.conf.default.accept_redirects=0 # sysctl -w net.ipv4.route.flush=1 # sysctl -w net.ipv6.route.flush=1

Свойства

Операционные системы: alinux-2
Теги: cis-convertedkernellinuxsysctl
Источник: CIS Aliyun Linux 2 Benchmark v1.0.0 ARCHIVE - 3.2.2

Проверить этот хост

Выполните команду на компьютере, аудит которого вам разрешён. Сканирование работает только на чтение.

shell

tmaegis scan --target linux