Configure source interface for SNMP Traps

보통레벨 1자동cisco-nxos

설명

The administrator can configure SNMP to the interfaces source IP address for notifications. By using a source interface the administrator can ensure that the source IP of SNMP traps does not change as the network topology changes. For instance, if a link fails or is reconfigured, and a different IP address is now topologically "closer" to the SNMP ... CIS marks this Manual; automated as a config-line check. Audited against the output of 'show running-config' (run 'terminal length 0' first; do not use 'show running-config all', which adds default values).

점검 방법

감사 방식: 구성 패턴

패턴: (?m)^snmp-server (?:source-interface (?:traps|informs) |host \S+ source-interface )\S

조치 방법

조치 방식: 가이드 또는 인프라 패치

snmp-server host 1.2.3.4 source-interface mgmt 0 or snmp-server host 1.2.3.4 source-interface loopback 0 SNMP Server traps or informs: snmp-server source-interface traps loopback 0 snmp-server source-interface informs loopback 0 or snmp-server source-interface traps mgmt 0 snmp-server source-interface informs mgmt 0

속성

운영 체제: 모두
태그: cisco-nxosnetworksnmp
참고 자료: CIS Cisco NX-OS Benchmark v1.2.0 - 1.9.3 Configure source interface for SNMP Traps

이 호스트 점검하기

감사 권한이 있는 시스템에서 실행하세요. 스캔은 읽기 전용입니다.

shell

tmaegis scan --target cisco-nxos