Host iSCSI client, if enabled, must employ unique CHAP authentication secrets

中レベル 1手動レビューvmware

説明

Challenge-Handshake Authentication Protocol (CHAP) requires both client and host to know a secret to establish a connection. It is essential to employ unique CHAP authentication secrets for each iSCSI session to ensure secure communications. The parameter governing this behavior is outlined in the iSCSI or iSER storage adapter configuration under CHAP settings. Manual review: the check needs vCenter/PowerCLI, firmware or guest access, or an organization-specific value.

チェック方法

監査方法: 手動レビュー

この推奨事項は自動ではチェックできません。--include-manual を指定すると、スキャン結果にこの手順付きで一覧表示されます。

To verify the CHAP secrets are unique, run the following to list all iSCSI adapters and their corresponding CHAP configuration: # List Iscsi Initiator and CHAP Name if defined Get-VMHost | Get-VMHostHba | Where {$_.Type -eq "Iscsi"} | Select VMHost, Device, ChapType, @{N="CHAPName";E={$_.AuthenticationProperties.ChapName}}

修正方法

修正方法: ガイダンスまたは IaC パッチ

To change the values of CHAP secrets so they are unique, perform the following: 1. From the vSphere Web Client, select the host. 2. Click Configure then expand Storage. 3. Select Storage Adapters then select the iSCSI Adapter. 4. Under Properties click on Edit next to Authentication. 5. Next to Authentication Method specify the authentication method from the dropdown. None Use unidirectional CHAP if required by target Use unidirectional CHAP unless prohibited by target Use unidirectional CHAP Use bidirectional CHAP 6. Specify the outgoing CHAP name. Make sure that the name you specify matches the name configured on the storage side.

プロパティ

オペレーティングシステム: すべて
タグ: vmwareesxiservices
参照: CIS VMware ESXi 9.0 Benchmark v1.0.0 - 6.3.2 Host iSCSI client, if enabled, must employ unique CHAP authentication secrets