TMA-ESXI9-1.2

Host hardware must enable UEFI Secure Boot

高レベル 1自動vmware

説明

UEFI Secure Boot is a security feature of the Unified Extensible Firmware Interface (UEFI) specification. Its primary purpose is to ensure that only signed and trusted boot loaders and operating system kernels are allowed to execute during the system startup. The audit runs /usr/lib/vmware/secureboot/bin/secureBoot.py -s and expects "Enabled". Runs in the ESXi Shell (busybox sh) as root.

チェック方法

監査方法: シェルコマンド

shell

out=$(/usr/lib/vmware/secureboot/bin/secureBoot.py -s 2>/dev/null) || exit 1
case "$out" in Enabled*) echo compliant ;; *) echo "secure boot: $out" ;; esac

期待される出力: compliant

修正方法

修正方法: ガイダンスまたは IaC パッチ

You must enable the physical server's UEFI Secure Boot in the server BIOS/UEFI. 1. Put the non-compliant Host into maintenance mode: vim-cmd hostsvc/maintenance_mode_enter 2. Verify Secure Boot compatibility: /usr/lib/vmware/secureboot/bin/secureBoot.py -c 3. Restart the ESXi host with the reboot command. 4. on the ESXI physical host BIOS/UEFI configuration, ensure that "boot mode" is UEFI 5. Under Boot or Security menus, look for "Secure Boot" and set it to "Enabled". 6. Save all modified firmware changes and reboot the ESXi host. 7. Verify results.

プロパティ

オペレーティングシステム: すべて
タグ: vmwareesxihardware
参照: CIS VMware ESXi 9.0 Benchmark v1.0.0 - 1.2 Host hardware must enable UEFI Secure Boot

このホストをチェック

監査が許可されているマシンで実行してください。スキャンは読み取り専用です。

shell

tmaegis scan --target vmware