Control Plane Policy Map

中レベル 1手動レビューarista-eos

説明

The default configuration comes with a pre-configured policy map to ensure adequate rate limiting for most traffic types punted to the CPU. Control plane policing can be used to increase the security of Arista switches by protecting the control plane from unnecessary or malicious traffic. It is recommended to implement control plane protection by classifying traffic types based on importance ... CIS assessment: Manual. Reported as SKIP with review instructions.

チェック方法

監査方法: 手動レビュー

この推奨事項は自動ではチェックできません。--include-manual を指定すると、スキャン結果にこの手順付きで一覧表示されます。

CIS assessment: Manual. Verify a policy map is applied to the control plane switch#show running-config all section system control-plane Expected output system control-plane ip access-group default-control-plane-acl in ip access-group default-control-plane-acl vrf MGMT in ipv6 access-group default-control-plane-acl in ipv6 access-group default-control-plane-acl vrf MGMT in service-policy input copp-system-policy switch# Check the configuration of the service policy #show policy-map type control-plane copp-system-policy Service-policy input: ...

修正方法

修正方法: ガイダンスまたは IaC パッチ

If no policy is configured, enable the default policy system control-plane service-policy input copp-system-policy

プロパティ

オペレーティングシステム: すべて
タグ: arista-eosnetworkhardening
参照: CIS Arista EOS Benchmark v1.0.0 - 1.1.3 Control Plane Policy Map