TMA-MFD-2.1.1
Set a Static IP Addresses
Description
Network devices commonly support two distinct methods for obtaining an IP address; statically and dynamically. Statically assigned IP addresses are typically stored within the device’s NVRAM. Dynamically assigned IP addresses are typically obtained at device boot- time via one of many network-based broadcast mechanisms. It is recommended that a static IP address be assigned to the MFD. The use of static IP addresses reduces the device’s exposure to attacks against broadcast IP configuration mechanisms, such as DHCP and BOOTP. Additionally, static IP addresses may increase an organization’s ability to effectively monitor and protect the device from network-born threats as the device’s IP address will remain constant in Intrusion Detection System (IDS) logs and firewall policies.
Méthode de vérification
Méthode d'audit: Revue manuelle
Cette recommandation ne peut pas être vérifiée automatiquement. Une analyse la liste avec ces instructions lorsque vous passez --include-manual.
Verify compliance with CIS Multi-Function Device Benchmark v1.0.0 section 2.1.1: Set a Static IP Addresses.
Méthode de correction
Méthode de correction: Recommandation ou correctif d'infrastructure
Follow the remediation procedure in CIS Multi-Function Device Benchmark v1.0.0 section 2.1.1 to configure: Set a Static IP Addresses.
Propriétés
- Systèmes d'exploitation
- Tous
- Étiquettes
- mfdprinter
- Référence
- CIS Multi-Function Device Benchmark v1.0.0 - 2.1.1 Set a Static IP Addresses