Juniper Junos
TMA-JUNIPER-JUNOS-4.2.4
Ensure loose authentication check is not configured
Beschreibung
IS-IS Neighbors should be authenticated. Where it is deployed, IS-IS routing is vital for normal operation of an organization's network infrastructure. Correct route information is required for routers to correctly direct traffic through the network. Audited against the output of 'show configuration | display set | no-more' (set format, not the curly-brace hierarchy).
So wird geprüft
Prüfmethode: Konfigurationsmuster
- Muster
(?m)^set protocols isis [^\n]*\bloose-authentication-check\b
So wird behoben
Behebungsmethode: Anleitung oder Infrastruktur-Patch
! If you have deployed IS-IS in your network and have enabled loose authentication checking, re-enable it by issuing the following command from the hierarchy: delete protocols isis loose-authentication-check
Eigenschaften
- Betriebssysteme
- Beliebig
- Tags
- juniper-junosnetworkaaa
- Referenz
- CIS Juniper OS Benchmark v2.1.0 - 4.2.4 Ensure loose authentication check is not configured
Diesen Host prüfen
Führen Sie dies auf einem Rechner aus, den Sie prüfen dürfen. Der Scan ist schreibgeschützt.
tmaegis scan --target juniper-junos